Synthesis, Characterization and Evaluation of a Novel Tetraphenolic Compound as a Potential Antioxidant.

A novel antioxidant containing four hydroxyl groups, namely 2,2'-(2-methylpropane-1,3-diyl)bis(hydroquinone) (MPBHQ), was synthesized using hydroquinone and methylallyl alcohol as the raw materials, phosphoric acid as the catalyst, and toluene as the solvent system. The structure of MPBHQ was characterized by mass spectrometry, nuclear magnetic resonance, ultraviolet spectroscopy, and infrared spectroscopy. The results showed that MPBHQ has a good radical scavenging effect, as measured by the ORAC assay, DPPH radical scavenging assay, ABST radical scavenging assay, and Rancimat test. In fatty acid methyl ester and lard without exogenous antioxidants, MPBHQ showed better antioxidant performance than butylated hydroxytoluene (BHT), hydroquinone (HQ), tert-butyl hydroquinone (TBHQ), and propyl gallate (PG), meeting the need for a new antioxidant with better properties to ensure the oxidative stability of lipids and biodiesel.

Evaluation of high oleic sunflower oil oleogels with beeswax, beeswax-glyceryl monopalmitate, and beeswax-Span80 in cookie preparation.

BACKGROUND: Shortening is used widely in cookie preparation to improve quality and texture. However, large amounts of saturated and trans fatty acids present in shortening have adverse effects on human health, and much effort has been made to reduce the use of shortening. The use of oleogels might be a suitable alternative. In this study, the oleogels of high oleic sunflower oil with beeswax (BW), BW-glyceryl monopalmitate (BW-GMP), and BW-Span80 (BW-S80) were prepared and their suitability to replace shortening in cookie preparation was evaluated. RESULTS: The solid fat content of BW, BW-GMP, and BW-S80 oleogels was significantly lower than that of commercial shortening when the temperature was not higher than 35 °C. However, the oil-binding capacity of these oleogels was almost similar to that of shortening. The crystals in the shortening and oleogels were ß' form mainly; however, the morphology of crystal aggregates in these oleogels was different from that of shortening. The textural and rheological properties of doughs prepared with the oleogels were similar, and clearly different from those of dough with commercial shortening. The breaking strengths of cookies made with oleogels were lower than that of cookies prepared with shortening. However, cookies containing BW-GMP and BW-S80 oleogels were similar in density and color to those prepared with shortening. CONCLUSION: The textural properties and color of cookies with BW-GMP and BW-S80 oleogels were very similar to those of the cookies containing commercial shortening. The BW-GMP and BW-S80 oleogels could act as alternatives to shortening in the preparation of cookies. © 2023 Society of Chemical Industry.

Thermal Properties, Microstructure and Crystallization of Blends of Leaf Lard and Cottonseed Oil Stearin.

Blend oils composed by leaf lard (LL) and cottonseed oil stearin (COS) were prepared and the thermal property, microstructure and crystallization of these blends were investigated in the present study. Solid fat content (SFC), thermal behaviors, triacylglycerols composition, crystal structure and morphology of the LL and COS blends were determined by pulsed nuclear magnetic resonance (pNMR), differential scanning calorimetry (DSC), high-performance liquid chromatography (HPLC), X-ray diffractometer (XRD) and polarized light microscope (PLM), respectively. SFC profiles and iso-solid diagrams indicated that SFCs of all blends were almost close to the weighted averages of the fat components at temperatures beyond 20°C; however, below 20°C, SFCs of blends exhibited higher than those of the weighted averages of the fat components. With the content of COS increasing, palmitic acid and linoleic acid in the blends increased, while stearic acid and oleic acid decreased; monounsaturated-disaturated (USS) and triunsaturated (UUU) glycerides in the blends enhanced, while monosaturated-diunsaturated (UUS) glycerides declined. The melting temperature of the blends decreased with the increase of COS content. The crystal forms in LL were ß' and ß, and the packing pattern was double and triple chain length (2L and 3L). With COS in blends increasing, ß' form crystals and 3L pattern reduced. Polarized light micrographs showed that the number of crystal particles in the blends raised with the increase of COS content, meanwhile, the grainsize of the sample gradually decreased. Visual appearances of the blends indicated that blending LL with COS could efficiently reduce the graininess of LL. The addition of COS had a significant effect on the crystallization behavior of LL. LL presented one-step crystallization at 10°C and 20°C, while COS showed two-step crystallization at 10°C and one-step crystallization at 20°C. However, the blends exhibited obvious two-step crystallization at 10°C, one-step or slight two-step crystallization at 20°C.

In-situ solid phase thermal transformation of self-assembled melamine phosphotungstates produce efficient visible light photocatalysts.

Visible-light-driven stacked-layer heterogeneous photocatalyst carbonitride/tungstophosphate (TCN) was constructed via in-situ solid-state thermal transformation using melamine phosphotungstate (MPW). The structural, morphological and optical properties of the samples were investigated. Compared to the MPW hybrids and phosphotungstic acid hydrate, the TCN photocatalysts showed excellent visible light photocatalytic activity. During the thermal transformation, the melamine molecules polymerize to form the defective heptazine structure carbonitride attached to the surface of mixed-valence Keggin units. The interfacial POMs anions-π interactions, ligand-to-metal charge transfer and mix-valence organic-POMs structure makes the electrons fully delocalized over the MPW hybrids, and the TCN photocatalysts obtain the extended light absorption. The Keggin units accept and transfer electrons, so the recombination of photogenerated carriers is suppressed. 13TCN-390 obtains the optimal photocatalytic activity, its photocatalytic degradation efficiency of imidacloprid and rate constant k are 6.38 and 13.50 times than that of CN-390, respectively. The enhanced photocatalytic activity arises from the extended light absorption, suppressed photogenerated carriers' recombination, surface structure defect and suitable band structure. h+ and OH are the main reactive species when the proposed photocatalytic mechanism was done. This study provides a promising construction strategy for polymer/POMs photocatalysts using different organic-POMs hybrids.